After reinstallation + installation of the latest ACPI, APM, DANIS506R183 and uniadu1.9.3 drivers the touch pad mouse works. Also the sounds are heard, and less of the previously mentioned pauses are seen. Wlan not working yet.
|Tapio Angervuori |
I ran the Setup Defaults From the bios setup menu. The PS/2 mouse started working! This setup reorders only the Boot priority order. It is not possible to configure anything else from the bios menu.
I also changed the ACPI IRQ number from 9 to 4. Previously there were small pauses relating to spikes seen in the CPU load monitor. These pauses/spikes do not appear after the IRQ number is changed!
My parameters for the APPI.PSD are now:
/SMP /PIC /R /IRQ:4 or /SMP /APIC /!NOD /R /IRQ:4