Andrei Porodko 
2002-04-12 07:12:41 | Board ...... ......... . ...... ....... ...... |
deep_blue
2002-05-22 23:11:01 | . .... ...... ....... .. ...... ........ .... .... - . ....... ......... ......... ........ - ....... .... . Auror-. ...... .......... Fast Eterlink Family - ... ... . .... ....... - ..... .........
. ... ......... - ......... ........ .. ..... .... (BUS) . ... ..... ..... - . .... .. ......... ......... ... PCI .......... ... ......... .. 2.... . ........ . PROTOCOL.INI ......... ............. BUSNO=2.
. .... ... ..... - .. .... ........... ......... ... DEVICENO = # ,... # ..... ..... . ..... PCI - .. ...... ....... ..... ... ........ ..... - ... ......... .. ..... ... ..... .......... ..... ..... ....., .......... . ... ..... -
!!!........ .. ...... 3COM , .. . ...... .... .... .......... ....., . .... .......... ....., .... RTL8029.
.........: ... ......... ............ MPTS .... protocol.ini ............ - ....... .. ........ ..... ... ......... ..... ...... .... ..... ......... ............ ....
.... |
Alexander Tebnihin
2002-05-27 12:44:55 | ... ........ Intel Intel(R) PRO PCI Adapter, ... ... . e100beo2.nif
..... ... ... . ...........
[SLOT]
display = "Slot/Device Identifier"
type = Hexadecimal
range = 0-1FFF
optional = YES
editable = YES
help = "Use of this parameter is only required in systems with more than one
adapter installed. If you are installing more than one PCI adapter: 1) complete
the configuration process, but leave the Slot field blank for each driver;
2) restart the system and record the list of Slots that each driver displays;
3) complete the configuration by assigning one of the values from the list to
the Slot parameter of each driver. Leave the field blank if you have only one
adapter installed."
|
